Close up view of machine showing:
  Indicating Dial, Handwheel for Adjusting Same
  Hand Wheel for Turning Machine by Hand
  2 Foot Pedals, One for Starting and Stopping Machine, One for Disengaging Roll of Cloth From Cutter at Any Time If Desired


All Moving Parts Well Guarded


For Cutting Tubular Knitted Cloth the Stretchy Way of the Material


  • Machine can be run as fast as operator can handle it.
  • Knives are adjustable. operator can change from one width to another in a few seconds.
  • Indicating dial enables operator to quickly and easily set and reset the speed of roll correctly to cut from any roll of cloth from 10" to 32" diameter.
  • Variable speed motor drive so you can speed it up as your operator improves.
  • Machine is at proper height so that operator is in controllable position.
  • Cutting directly from a roll you eliminate starting more than once on a roll, saving end waste by this method.
  • Roll holding bracket has adjustment so that proper tension can be put on roll. also has quick opening lever to load and unload roll.
  • Has trouble free variable speed drive and clutch on roll attachment.
  • Has reinforced cutter arm shaft and lower hardened shaft for perfect cutting.
  • Made in following width hardened lower shafts where the knives run (9-3/4" not reinforced) (13", 16-1/4", 19-1/2" are reinforced on top and bottom shafts).
  • You can cut and roll up as many strips as you have knives that will divide up in the hardened collar space on your machine.
  • Has crushing cutters- handles all types of fabrics.
  • Standard machine- equipped with 3 knives. more can be added anytime.
  • Ball and frictionless bearings- throughout all moving parts.
  • Knives- run in ball bearings.
  • Main toggle shaft- runs in large enclosed ball bearings.
  • Train of gears -running in oil.
  • Very rigidly built for long trouble free performance.
  • Any standard collarette cutter made by us can be quickly and easily mounted on this device.

Specifications subject to change without prior notice.


561 Main Street, New York Mills, NY 13417 USA
Phone: (315) 736-3030 • Fax (315) 736-2909
© Utica Mill Specialty Machinery Co., Inc.